- 8 splice tray
- 555*106*290 mm
- cable diameter 4:7-12mm; 2:20mm
Caja de Empalme de fibra óptica 256 FO (FCAU-64/128) is a universal access junction box that allows the continuity and segregation of medium capacity optical cables used in the deployment of optical power and transport networks.
The design of the box allows the mechanical continuity of the cable traction elements and protects the fibers, joints and optical devices, facilitating the organization of splices and the storage of excess fiber.
Caja de Empalme de fibra óptica 256 FO (FCAU-64/128) is hermetic and resistant to weather conditions so it can be installed both outside and inside buildings in manholes, walls, posts or cable galleries
Caja de Empalme de fibra óptica 256 FO (FCAU-64/128) has 4 independent cable accesses at one end. Each of them allows the individualized input of at least two medium capacity multi-fiber cables (double inputs) and up to 6 small capacity optical cables (7mm).
The closing cap is completely mounted and removed without the need for special tools thanks to the hermetic clip-type closure.
The Caja de Empalme de fibra óptica 256 FO (FCAU-64/128) access cables are sealed using rubber gaskets with pre-cut entries.
Cable in / out diameter from 22 to 7 mm. Maximum 256 FO fusions (double layer).
Wide, easy-access, rectangular-shaped splice trays with extendable tabs for better fiber storage up to 32 FO (double layer). Both the support block and the individual trays allow for 90o rotation and their interlocking in fixed positions to facilitate installation.
The boxes can be opened, closed and manipulated without interrupting working circuits. It allows to join and segregate cables without having to cut all the fibers as well as the adequate storage of the tubes and / or excess fibers of the cables.
|Base y Caja Policarbonato de alta resistencia. Color gris claro|
|Bandejas Policarbonato +ABS. Color negro|
Axial tension Cable load> D / 45 mm x 1000 N. D: cable diameter. 1 hour by cable. Cable travel <3mm
Cable bending: 30 ° bending max. 500 N. Application of force: 400 mm from the end of the seal. No. of cycles: 5 / cable.
Cable torsion: Maximum rotation torque 90 ° / max 50 N. Application of force: 400 mm from the end of the seal. No. of cycles: 5 / cable.
Vibration Frequency: 10 to 15Hz. Speed: one octave per minute. Cycle: sinusoidal; width: 3mm (6mm peak to peak) Cable clamping: 500mm from end of seal. Duration: 2 hours per axis
Static load> 1000 N (25 cm2, 10min).
Operating temperature -25 to +70 oC.
Degree of protection against mechanical impacts IK09 (20 J).
The box, once closed, is totally hermetic and resistant to weather conditions. Degree of protection IP-68.