AirMaster 6300D Premium CAT7 LTE Outdoor CPE

  • cat7
  • LTE
  • IP67
  • 1 RJ45 10/100/1000Mbps ETH
  • 1 RJ45 10/100/1000Mbps ETH

Related Products


AirMaster 6300D is highly advanced TD-LTE CAT7 outdoor data unit specially designed to meet the most challenging demands of today’s high speed wireless backhaul and fixed wireless access deployments by the 4G service operators. The unit can support multiple TDD band operations. Multiple operator network support can also be provisioned on the unit to allow the deployment across entire country with different operators.
AirMaster 6300D provides Gigabit PoE connection to connect user terminal device such as router or Wi-Fi AP products. The unit PoE interface can also work with standard PoE switches or router products. The product comes with PoE power adapter and mounting bracket accessories for quick self-installation.

AirMaster 6300D is designed to meet the stringent operation environment for outdoor CPE devices. The device can safely operate in a wide temperature ranging from -40 to +55 degree and meets industrial IP67 water and dust proof standard requirements. The device MTBF time is expected to be above 80,000 hours. Depending on the network configuration and DL/UL split ratio configuration, the unit can provide up to 230Mbps max throughput over the air. The typical coverage should be more than 15km with reasonable good throughput performance.
AirMaster 6300D is a user-friendly LTE CPE that is easy to install and maintain. The unit is fully integrated and comes with all the necessary device drivers pre-loaded. Subscribers just connect the device to their computer or home switch/router and the device is ready to offer an experience of surfing over Internet. The LEDs on the AirMaster 6300D have also been designed for user convenience, and offer a clear sign of what the device is doing. The IP addresses can be dynamically obtained via DHCP.
AirMaster 6300D offers rich management features which facilitate the task of carrier. It supports local management access, Telnet, Http, Https and standard TR069 remote OTA management including device configuration, monitoring, and upgrades management.

AirMaster 6300D design is based on the standard implementation of LTE release 10 specification. It is able to meet the most demanding requirements of large service providers with high throughput and availability. AirMaster 6300D is a CAT7 CPE and supports advance features such as 4×4 MIMO, Carrier Aggregation, QAM64 modulation on the uplink.
With high gain directional patch antenna, AirMaster 6300D enables a longer reception range from the base station. This yields more efficient use of the network with a larger cell reach, guaranteed carrier class service, and customer service probability. Advanced Orthogonal Frequency Division Multiplexing (OFDM) modulation enhances performance in non-line-of-sight (NLOS) conditions to ensure immunity to interference and multi-path conflicts typical of deployments in densely populated urban areas.


Data Networking Features

VPN Pass-through support (PPTP, L2TP & IPsec)

Built-in L2TP&GRE Tunneling Clients

Firewall & Access Control

DMZ and Virtual Server Support

IP and Port Filtering Support

Local and Remote Management Restriction

Application Firewall Support

LAN Device Access Control

Device Management

CLI, Telnet, HTTP and HTTPS Management Interfaces

Standard Based TR-069 Management

FTP and HTTP OTA Firmware Upgrade

USIM and Network PLMN Locking Support

Device Factory Default Setting

Industry Standards


3GPP                           LTE Release 10


IEEE 802.3                         10Base Ethernet

IEEE 802.3u              Fast Ethernet

IEEE 802.3ab      Gigabit Ethernet


WaterResistance      IP67

Safety                          FCC or CE

Send us an Inquiry

Your Email ( required )


* Your inquiry is usually answered within 3 hours.