E2000 Fiber Optic Attenuator

Advantages & Features

  • High durability and resistance
  • Attenuation value from 1dB to 30dB
  • Low polarization related loss
  • Attenuation accuracy and stability
Get Free Sample Now Fast delivery!

Product details for E2000 Fiber Optic Attenuator

e2000 fiber optic attenuator includes e2000 single mode female to female fiber optic attenuator from 1dB to 30dB.to connect e2000 fiber optic pigtail or patch cables to reduce the power of signal at a certain attenuation.

e2000 fiber optic attenuator includes e2000 single mode female to female fiber optic attenuator from 1dB to 30dB.E2000 fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing(DWDM) and Erbium Doped Fiber Amplifier(EDFA)applications where the receiver can’t accept the signal generated from a high-power light source.

The widely used E2000 attenuator types are E2000 adaptor type show as below:

E2000/UPC Adaptor type Attenuators

E2000 UPC Attenuators

e2000-fiber-optic-attenuator

E2000/APC adaptor type Attenuators

 SC/UPC E2000 Male to Female attenuators,show as below:

E2000 attenuators male to female.

E2000/UPC Male to Female attenuator

SC APC E2000 female to male fiber optic attenuators details show as below:

SC APC E2000 female to male fiber optic attenuators

SC APC E2000 female to male fiber optic attenuators

SC APC E2000 female to male fiber optic attenuators..

SC APC E2000 female to male fiber optic attenuators..

E2000 fiber optic attenuators Characteristics:

Metal ion doped fiber

High-power light source durability

Wavelength independence

Attenuation levels ranging from 1dB to 30dB, with standard and premium tolerances, plus custom configurations.

1310nm, 1550nm, 1250-1625nm and 1350/1550nm dual wave lengths

E2000 fiber optic attenuators Applications:

Erbium Doped Fiber Amplifiers (EDFA)

Dense Wave Division Multiplexers (DWDM)

Overpowered fiber optic systems

CATV

Attenuators Action principles during the Multimode and Single mode system:

attenuators Action principle

Parameters:

Parameter Value Unit
Operating Wavelength 1310/1550;850 nm
Tolerance for 1~5 dB Attenuation ± 0.5 dB
Tolerance for 6~30 dB Attenuation ± 10  %
Return Loss > 65 dB
Operating Temperature -40 to +80 C
Polarization Dependent Loss ≤ 0.1 dB
Mating Durability ≥ 1000 cycle
Transfer Mode SM/MM
Connector Gender Fiexd Male to Female

Pakaging and logistic:

Packaging and logistics

Need E2000 Fiber Optic Attenuator Free Sample?

Take a minuate to tell us your contact details and requirements for E2000 Fiber Optic Attenuator samples you are looking for, We will get back to you within 1-6 hours always.

Your Email ( required )

Message